Can I use B12 IN CRANKCASE? If so, how do I go about it…2012 ACURA TL WITH STICKY OIL CONTROL RINGS CAUSING OCCASIONAL PISTON SLAP ON ACCELERATION.

Ask the Chemtooler

Your home for Product Questions & Solutions. Start by searching questions in the search box below. Or you can Browse by Category. If you don't find a relevant question and answer, then Ask a New Question.

AskTheChemtooler sidebar v1 Copy@2x

Can I use B12 IN CRANKCASE? If so, how do I go about it…2012 ACURA TL WITH STICKY OIL CONTROL RINGS CAUSING OCCASIONAL PISTON SLAP ON ACCELERATION.

Can I use B12 IN CRANKCASE? If so, how do I go about it…2012 ACURA TL WITH STICKY OIL CONTROL RINGS CAUSING OCCASIONAL PISTON SLAP ON ACCELERATION.

Solutions Central › Category: Cleaning / Degreasing > B-12 Chemtool® Carb › Can I use B12 IN CRANKCASE? If so, how do I go about it…2012 ACURA TL WITH STICKY OIL CONTROL RINGS CAUSING OCCASIONAL PISTON SLAP ON ACCELERATION.
0 Vote Up Vote Down
PHILLIP R ANDERSON asked 2 years ago
1 Answers
0 Vote Up Vote Down
chemtooler Staff answered 2 years ago
Yes, Berryman B-12 CHEMTOOL FUEL INJECTOR CLEANER (part #0116), is extremely effective in the removal of gum, sludge, and other deposits immediately before an oil change. To do so, pour into your cold crankcase approximately 1½-2 oz. of #0116 per quart of oil capacity. For instance, if your vehicle holds 5 quarts of oil, then you would use 7.5-10 oz. of or about half to two-thirds of one can. After you’ve added it to your cold oil, start the car and run it at idle 10-15 minutes until the oil is warmed up. Then change the spent oil and replace the oil filter. If the buildup is quite severe, it may require a few applications.

Berryman Products